Swimming Pool Builders in Chennai, Coimbatore, Thiruvananthapuram, Calicut, Cochin, Madurai, Trichy

January 19, 2021

Swimming pool Builders

Our mission at Pool Cleaning Service is simple: to provide high-quality services in a timely manner. We hope you’ll find what you’re looking for.

PHASE 1: SELECTION OF LOCATION AND DESIGN

To encourage routine maintenance, the location chosen for the pool must be perfect. A area far from trees helps to prevent a lake full of leaves. The swimming pool's orientation is best when it is built facing the light.

PHASE 2: EARTH EXCAVATION

The next procedure is to excavate the area to plan for construction once the design and position for building the swimming pool are set. It is carried out using the following steps:

Mark the swimming pool perimeter using wooden stakes. Extend a tread around the perimeter to precisely locate the region of the swimming pool.

PHASE 3: CONSTRUCTING THE SWIMMING POOL FOUNDATION

One of the important stages influencing the life of the swimming pool is the building of the pool foundation. The drilling is performed so that it becomes smooth and uniform on the bottom face. If the site has loose soil, then it must be filled with firm soil and compacted.

PHASE 4: REINFORCEMENT OF STEEL CAGES

The next move is to provide steel reinforcement for the pool wall and the bottom once the excavation of the pool walls and the preparation of the foundation are completed. Place the necessary plumbing lines, drainage lines, etc. inside the cage arrangement after offering steel reinforcement. Also, the provision for stairs on the sides is according to the plan.

PHASE 5: SWIMMING POOL PUMP AND FILTER SYSTEM

On a wide tank, either made of concrete, metal, etc., a filter system and pump together are arranged. The plumb lines are given prior to concretion to take water from the swimming pool to the filter system and back to the swimming pool.

To carry out fresh water to the pool, the filter system and pump are both attached to the municipal water line. The arrangement is required due to splash out or evaporation to replace the water drained from the tub.

PHASE 6: CONCRETION IN THE BUILDING OF SWIMMING POOLS

A concrete of normal mix performs the shotcreting or guniting of walls and floors. To shape the surface as per the plan, use special tools. It must be cured twice daily for 14 days after the concrete has been completed.

PHASE 7: THE CONCRETE WATERPROOFING SWIMMING POOL

Tiles, glass, ceramics, or the use of an epoxy-cement system or any waterproofing membrane are the most common ways to waterproof concrete pools. The selection of the waterproofing system is carried out on the basis of the area's water table level and soil moisture conditions. To make it watertight, the waterproofing of walls and floors is carried out.

PHASE 8: BUILDING COPING

The walking room given around the edge of the pool is coping. It can be made of concrete, marble, canvas, or stone. Often wait for two to three days to fill the pool after the construction of coping.